序号 |
论 文 名 称 |
作者 |
刊物名称 |
发表日期 |
1 |
The research for the
auxiliary power unit APU and its work characteristics of BJD6100HEV series
hybrid electric bus |
汪云 |
PRZEGLAD ELEKTROTECHNICZNY |
2012.10 |
2 |
基于运动仿真的凸轮机构参数逆向CAD方法 |
张俊 |
现代制造工程 |
2012.2 |
3 |
Pro/E阵列功能在圆锥滚子从动件圆柱凸轮建模中的应用 |
张俊 |
机械设计与制造 |
2012.4 |
4 |
偶联剂处理陶瓷颗粒增强聚丙烯复合材料的性能 |
张俊 |
广东化工 |
2012.2 |
5 |
响应曲面发优化超高强钢铣削加工切削参数的研究 |
刘亚丽 |
《工具技术》 |
2012.7 |
6 |
基于三维技术的机械基础系列课程的优化整合研究 |
高成慧 |
制造业自动化
|
2012.3 |
7 |
Simulation
of Woody Leaf Netted Venation Based on Optimization Technique |
陈雷 |
Transactions
of the KSME B (韩国机械工程师学会学报) |
2012.9 |
8 |
ON-MACHINE
MEASUREMENT OF LARGE-SCALE ORKPIECE
BASED ON MACHINE VISION |
王中任 |
International
Journal of Tehoretical and Information Technology
|
2012.9 |
9 |
圆锥面太阳能聚光器的理论研究与设计 |
程金铭 |
北京理工大学学报 |
2012.2 |
10 |
PAMC
based IEEE 1451 wireless sensor interface plug and play mechanism and
implementation[C] |
周岳斌 |
2012
International Workshop on Information and Electronics Engineering |
2012.9 |
1 |
Diagnosis
of Supply Chain’s Reliabil ty
Based on Common Cause Failure |
陈国华 |
International
Review on Computers and Software |
2012.1 |
12 |
Simulation
of Reliability Diagnosis of Supply Chain Based on CCFBSAS |
陈国华 |
Research
Journal of App ied S iences |
2012.5 |
13 |
Application
of Wide Band Oxide Semiconductor in Bulk Heterojunction Solar Cells |
叶建民 |
App.Mech.
Mater.198 (2012) 64-67 |
2012.7 |
14 |
The
Effect of Acceptor Content on the Efficiency of Organic P
tovoltaic Cells |
叶建民 |
App.Mech.
Mater.209 (2012) 1801-1805
|
201 .7 |
15 |
The
research for the auxiliary power unit APU and its work characteristics of
BJD6100HEV series hybrid electric bus |
汪云 |
PRZEGLAD
ELEKTROTECHNICZNY |
2012.10 |
16 |
基于三维技术的汽车造型设计研究 |
李和 |
制造业自动化 |
012.6 |
17 |
基于三维重构的车身曲面设计方法研究 |
李和 |
制造业自动化 |
2012.2 |
18 |
圆钢管混凝土受压短柱实验研究及有限元仿真分析 |
李月安 |
混凝土与水泥制品 |
2012.1 |
19 |
Nickel
hydroxide sulfate nanobelts:
Hydrothermal synthesis,electrochemica property andconversion to porous NiO
nanobelts |
贾志勇 |
ENERGY
EDUCATION SCIENCE & TECHNOLOGY, PART A:Energy Science and Research |
2012.9 |
20 |
基于Pro/E的空间分度凸轮精确建模与加工 |
张 俊 |
机械传动 |
2011.9 |
21 |
基于Pro/Mechanism的摆动从动件圆锥凸轮建模与NC加工 |
张 俊 |
组合机床与自动化加工技术 |
20 1.10 |
22 |
陶瓷颗粒在无规共聚聚丙烯改性中的应用 |
张 俊 |
广州化工 |
2011.10 |
23 |
凝胶注射成型氧化铝陶瓷坯体的力学性能研究 |
张 俊 |
广西轻工业 |
20 1.12 |
24 |
陶瓷颗粒填充聚丙烯复合材料的摩擦性能研究 |
张 俊 |
河北化工 |
2011.12 |
25 |
Study
on Delivery Reliability of Push-Pull Mixed Supply Chain |
陈国华 |
2011ICIA, |
2011.6 |
26 |
Contrastive
Study on Operating Characteristics of Push and Pull in Supply Chain |
陈国华 |
2011ICCSN |
2011.5 |
27 |
Study
on Operating Mechanisms and Dynamics Behavior of Agile Supply Chain |
陈国华 |
Journal of
Software |
2011.5 |
28 |
The
Simulation of Reliability of Supply Chain System Based on Repair Theory |
陈国华 |
EBM2011 |
2011 3 |
29 |
|
|
|
|
3
|
A Machine Vision Approach to Tool
Condition Monitoring Based on the Image of Workpiece Surface Texture |
王中任 |
Advanced Material Research |
2011.8 |
31 |
On-machine measurement of metal parts based
on machine vision |
王 任 |
Applied Mechanics and Materials |
2011.8 |
32 |
Break through the Bottleneck of Creative
Application Talents for Mechanical Engineering by Means of Teaching Reform |
王中任 |
nternational Conference on Economic,
Education and Managemen |
2011.10 |
33 |
含多间隙转动铰机构虚拟样机建模与动力学仿真研究 |
王华杰 |
机械研究与应用 |
2011.6 |
34 |
Studies of the SCR electronic control
system for diesel engines |
汪云 |
2011 International Conference on Materials
for Energy & Environment |
2011.9 |
35 |
汽车曲面品质分析及光顺优化方法研究 |
李和 |
制造业自动化 |
2011.1 |
36 |
Quality analysis of class a surface and
research on smoothing optimization methods |
李和 |
ICEOE 2011 |
2011.7 |
37 |
Sonochemical Synthesis of
Single-Crystalline SrSn(OH)6Nanowires and the Performance of SrSnO3 Nanorods Used as Anode Materials for Li-IonBattery |
贾志勇 |
2011 International Conference on Materials
for Energy & Environment |
2011.7 |
38 |
The synthesis of flower-like layered double hydroxides nanocrystals and their
calcined products |
贾志勇 |
2011 International Conference on Materials
for Energy & Environment |
2011.7 |
39 |
Nickel Hydroxide Sulfate Nanobelts:
Hydrothermal Synthesis, Electrochemical Property and Conversion to Porous NiO
Nanobelts |
贾志勇 |
2011 International Conference on Materials
for Energy & Environment |
2011.7 |
40 |
The Controlled Formation of TiO2 Nanosheets
with (001) Facets |
贾志勇 |
2011 International Conference on Materials
for Energy & Environment |
2011.7 |
41 |
The Sonochemical Fabrication for the CaCO3 Nanocrystals with
Different Morphologies |
贾志勇 |
Advanced Materials Research |
2011.7 |
42 |
A General Sonochemical Approach to Rapid
Synthesis of 1D Single-crystalline MSn(OH)6 (M=Ba, Ca, Sr)
Nanostructures |
贾志勇 |
Advanced Materials Research |
2011.7 |
43 |
From layered Ni(OH)2 thin films
to Ni(SO4)0.3(OH)1.4 nanobelts through SO42- inserting in colloid-based route |
贾志勇 |
Advanced Materials Research |
2011.7 |
44 |
The Controlled Synthesis of
Single-Crystalline Cd(OH)2 Nanoparticles with Different
Morphologies |
贾志勇 |
Advanced Materials Research |
2011.
|
45 |
基于Solidworks的石膏空心砌块成型机的三维设计 |
高成慧 |
机械 |
2011.9 |
46 |
石膏砌块成型机的虚拟样机设计 |
高成慧 |
机械工程与自动化 |
2011.5 |
47 |
基于UG的渐开线斜齿圆柱齿轮参数化设计 |
王淑贤 |
机械传动
|
2011.5 |
48 |
基于小波神经网络的凸轮轴铸造过程数值仿真的研究 |
张俊 |
《铸造技术》 |
2010.2 |
49 |
Modeling and Error Analysis of Monocular
Stereo Vision System for Large-scale Work piece On-machine Measurement |
王中任 |
Advanced Material Research |
2010.10 |
50 |
On-machine 3D Reconstruction Using Monocular
Stereo Vision System |
王中任 |
IEEE |
2010.10 |
51 |
Image Mosaic for On-machine Measurement of
Large-scale Workpiece |
王中任 |
IEEE |
2010.10 |
52 |
A calibration method of monocular stereo
vision system for on-machine measurement |
王中任 |
Proc. of SPIE IP RIE |
2010.10 |
53 |
面向数控加工的圆柱分度凸轮刀具轨迹计算与模拟 |
南朝子 |
现代制造工程 |
2010.1 |
54 |
.Study on Behavior Characteristics of
Supply Chain for Mass Customization |
陈国华 |
2010 international c nfenrence: ICICTA |
2010.3 |
55 |
基于虚拟样机技术的含间隙转动铰建模与动力学仿真 |
王华杰 |
机械设计与制造 |
2010.11 |
56 |
基于CAD/CAM技术的CLASSA曲面构造及曲面评价标准研究 |
李和 |
制造业自动化 |
2010.12 |
57 |
An Improved Method for Feature Point
Matching in 3D Reconstruction |
王中任 |
IEEE |
2009.6 |
58 |
基于虚拟样机技术的含间隙转动铰建模方法 |
王华杰 |
襄樊学院学报 |
2009.11 |
59 |
基于参数化设计的现代汽车车身设计方法研究 |
李和 |
工业设计 |
2009.1 |
60 |
汽车车身的参数化设计应用研究 |
李和 |
科协论坛(下半月) |
2009.5 |
